首页 最新 热门 推荐

  • 首页
  • 最新
  • 热门
  • 推荐

STM32—OLED模块

  • 25-03-08 00:41
  • 4742
  • 12392
blog.csdn.net

utf-8 编码下汉字需加

--no-multibyte-chars

1、OLED简介

  • OLED(Organic Light Emitting Diode):有机发光二极管
  • OLED显示屏:性能优异的新型显示屏,具有功耗低、相应速度快宽视角、轻薄柔韧等特点
  • 0.96寸OLED模块:小巧玲珑、占用接口少、简单易用,是电子设计中非常常见的显示屏模块
  • 供电:3~5.5V,
  • 通信协议:I2C/SPI,
  • 分辨率:128*64

一般来说:4阵脚使用I2C,7阵脚使用SPI

2、硬件电路

3、OLED驱动函数

函数作用
OLED Init();初始化
OLED Clear();清屏
OLED Showchar(1,1,'A');显示一个字符
OLED Showstring(1,3,"HelloWorld!");显示字符串
OLED ShowNum(2,1,12345,5);显示十进制数字
OLED ShowSignedNum(2,7,-66,2);显示有符号十进制数字
OLED ShowHexNum(3,1,0xAA55,4);显示十六进制数字
OLED ShowBinNum(4,1,0xAA55,16);显示二进制数字

OLED_Init();
    OLED_ShowChar(1, 1, 'A');
    OLED_ShowString(1, 3, "Hello world!");
    OLED_ShowNum(2, 1, 12345, 5);
    OLED_ShowSignedNum(2, 7, -66, 2);
    OLED_ShowHexNum(3, 1, 0xAA55, 4);
    OLED_ShowBinNum(4, 1, 0xAA55, 16);

 

4、代码

OLED.c

  1. #include "stm32f10x.h"
  2. #include "OLED_Font.h"
  3. /*引脚配置*/
  4. #define OLED_W_SCL(x) GPIO_WriteBit(GPIOB, GPIO_Pin_8, (BitAction)(x))
  5. #define OLED_W_SDA(x) GPIO_WriteBit(GPIOB, GPIO_Pin_9, (BitAction)(x))
  6. /*引脚初始化*/
  7. void OLED_I2C_Init(void)
  8. {
  9. RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
  10. GPIO_InitTypeDef GPIO_InitStructure;
  11. GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
  12. GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  13. GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
  14. GPIO_Init(GPIOB, &GPIO_InitStructure);
  15. GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
  16. GPIO_Init(GPIOB, &GPIO_InitStructure);
  17. OLED_W_SCL(1);
  18. OLED_W_SDA(1);
  19. }
  20. /**
  21. * @brief I2C开始
  22. * @param 无
  23. * @retval 无
  24. */
  25. void OLED_I2C_Start(void)
  26. {
  27. OLED_W_SDA(1);
  28. OLED_W_SCL(1);
  29. OLED_W_SDA(0);
  30. OLED_W_SCL(0);
  31. }
  32. /**
  33. * @brief I2C停止
  34. * @param 无
  35. * @retval 无
  36. */
  37. void OLED_I2C_Stop(void)
  38. {
  39. OLED_W_SDA(0);
  40. OLED_W_SCL(1);
  41. OLED_W_SDA(1);
  42. }
  43. /**
  44. * @brief I2C发送一个字节
  45. * @param Byte 要发送的一个字节
  46. * @retval 无
  47. */
  48. void OLED_I2C_SendByte(uint8_t Byte)
  49. {
  50. uint8_t i;
  51. for (i = 0; i < 8; i++)
  52. {
  53. OLED_W_SDA(Byte & (0x80 >> i));
  54. OLED_W_SCL(1);
  55. OLED_W_SCL(0);
  56. }
  57. OLED_W_SCL(1); //额外的一个时钟,不处理应答信号
  58. OLED_W_SCL(0);
  59. }
  60. /**
  61. * @brief OLED写命令
  62. * @param Command 要写入的命令
  63. * @retval 无
  64. */
  65. void OLED_WriteCommand(uint8_t Command)
  66. {
  67. OLED_I2C_Start();
  68. OLED_I2C_SendByte(0x78); //从机地址
  69. OLED_I2C_SendByte(0x00); //写命令
  70. OLED_I2C_SendByte(Command);
  71. OLED_I2C_Stop();
  72. }
  73. /**
  74. * @brief OLED写数据
  75. * @param Data 要写入的数据
  76. * @retval 无
  77. */
  78. void OLED_WriteData(uint8_t Data)
  79. {
  80. OLED_I2C_Start();
  81. OLED_I2C_SendByte(0x78); //从机地址
  82. OLED_I2C_SendByte(0x40); //写数据
  83. OLED_I2C_SendByte(Data);
  84. OLED_I2C_Stop();
  85. }
  86. /**
  87. * @brief OLED设置光标位置
  88. * @param Y 以左上角为原点,向下方向的坐标,范围:0~7
  89. * @param X 以左上角为原点,向右方向的坐标,范围:0~127
  90. * @retval 无
  91. */
  92. void OLED_SetCursor(uint8_t Y, uint8_t X)
  93. {
  94. OLED_WriteCommand(0xB0 | Y); //设置Y位置
  95. OLED_WriteCommand(0x10 | ((X & 0xF0) >> 4)); //设置X位置高4位
  96. OLED_WriteCommand(0x00 | (X & 0x0F)); //设置X位置低4位
  97. }
  98. /**
  99. * @brief OLED清屏
  100. * @param 无
  101. * @retval 无
  102. */
  103. void OLED_Clear(void)
  104. {
  105. uint8_t i, j;
  106. for (j = 0; j < 8; j++)
  107. {
  108. OLED_SetCursor(j, 0);
  109. for(i = 0; i < 128; i++)
  110. {
  111. OLED_WriteData(0x00);
  112. }
  113. }
  114. }
  115. /**
  116. * @brief OLED显示一个字符
  117. * @param Line 行位置,范围:1~4
  118. * @param Column 列位置,范围:1~16
  119. * @param Char 要显示的一个字符,范围:ASCII可见字符
  120. * @retval 无
  121. */
  122. void OLED_ShowChar(uint8_t Line, uint8_t Column, char Char)
  123. {
  124. uint8_t i;
  125. OLED_SetCursor((Line - 1) * 2, (Column - 1) * 8); //设置光标位置在上半部分
  126. for (i = 0; i < 8; i++)
  127. {
  128. OLED_WriteData(OLED_F8x16[Char - ' '][i]); //显示上半部分内容
  129. }
  130. OLED_SetCursor((Line - 1) * 2 + 1, (Column - 1) * 8); //设置光标位置在下半部分
  131. for (i = 0; i < 8; i++)
  132. {
  133. OLED_WriteData(OLED_F8x16[Char - ' '][i + 8]); //显示下半部分内容
  134. }
  135. }
  136. /**
  137. * @brief OLED显示字符串
  138. * @param Line 起始行位置,范围:1~4
  139. * @param Column 起始列位置,范围:1~16
  140. * @param String 要显示的字符串,范围:ASCII可见字符
  141. * @retval 无
  142. */
  143. void OLED_ShowString(uint8_t Line, uint8_t Column, char *String)
  144. {
  145. uint8_t i;
  146. for (i = 0; String[i] != '\0'; i++)
  147. {
  148. OLED_ShowChar(Line, Column + i, String[i]);
  149. }
  150. }
  151. /**
  152. * @brief OLED次方函数
  153. * @retval 返回值等于X的Y次方
  154. */
  155. uint32_t OLED_Pow(uint32_t X, uint32_t Y)
  156. {
  157. uint32_t Result = 1;
  158. while (Y--)
  159. {
  160. Result *= X;
  161. }
  162. return Result;
  163. }
  164. /**
  165. * @brief OLED显示数字(十进制,正数)
  166. * @param Line 起始行位置,范围:1~4
  167. * @param Column 起始列位置,范围:1~16
  168. * @param Number 要显示的数字,范围:0~4294967295
  169. * @param Length 要显示数字的长度,范围:1~10
  170. * @retval 无
  171. */
  172. void OLED_ShowNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
  173. {
  174. uint8_t i;
  175. for (i = 0; i < Length; i++)
  176. {
  177. OLED_ShowChar(Line, Column + i, Number / OLED_Pow(10, Length - i - 1) % 10 + '0');
  178. }
  179. }
  180. /**
  181. * @brief OLED显示数字(十进制,带符号数)
  182. * @param Line 起始行位置,范围:1~4
  183. * @param Column 起始列位置,范围:1~16
  184. * @param Number 要显示的数字,范围:-2147483648~2147483647
  185. * @param Length 要显示数字的长度,范围:1~10
  186. * @retval 无
  187. */
  188. void OLED_ShowSignedNum(uint8_t Line, uint8_t Column, int32_t Number, uint8_t Length)
  189. {
  190. uint8_t i;
  191. uint32_t Number1;
  192. if (Number >= 0)
  193. {
  194. OLED_ShowChar(Line, Column, '+');
  195. Number1 = Number;
  196. }
  197. else
  198. {
  199. OLED_ShowChar(Line, Column, '-');
  200. Number1 = -Number;
  201. }
  202. for (i = 0; i < Length; i++)
  203. {
  204. OLED_ShowChar(Line, Column + i + 1, Number1 / OLED_Pow(10, Length - i - 1) % 10 + '0');
  205. }
  206. }
  207. /**
  208. * @brief OLED显示数字(十六进制,正数)
  209. * @param Line 起始行位置,范围:1~4
  210. * @param Column 起始列位置,范围:1~16
  211. * @param Number 要显示的数字,范围:0~0xFFFFFFFF
  212. * @param Length 要显示数字的长度,范围:1~8
  213. * @retval 无
  214. */
  215. void OLED_ShowHexNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
  216. {
  217. uint8_t i, SingleNumber;
  218. for (i = 0; i < Length; i++)
  219. {
  220. SingleNumber = Number / OLED_Pow(16, Length - i - 1) % 16;
  221. if (SingleNumber < 10)
  222. {
  223. OLED_ShowChar(Line, Column + i, SingleNumber + '0');
  224. }
  225. else
  226. {
  227. OLED_ShowChar(Line, Column + i, SingleNumber - 10 + 'A');
  228. }
  229. }
  230. }
  231. /**
  232. * @brief OLED显示数字(二进制,正数)
  233. * @param Line 起始行位置,范围:1~4
  234. * @param Column 起始列位置,范围:1~16
  235. * @param Number 要显示的数字,范围:0~1111 1111 1111 1111
  236. * @param Length 要显示数字的长度,范围:1~16
  237. * @retval 无
  238. */
  239. void OLED_ShowBinNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
  240. {
  241. uint8_t i;
  242. for (i = 0; i < Length; i++)
  243. {
  244. OLED_ShowChar(Line, Column + i, Number / OLED_Pow(2, Length - i - 1) % 2 + '0');
  245. }
  246. }
  247. /**
  248. * @brief OLED初始化
  249. * @param 无
  250. * @retval 无
  251. */
  252. void OLED_Init(void)
  253. {
  254. uint32_t i, j;
  255. for (i = 0; i < 1000; i++) //上电延时
  256. {
  257. for (j = 0; j < 1000; j++);
  258. }
  259. OLED_I2C_Init(); //端口初始化
  260. OLED_WriteCommand(0xAE); //关闭显示
  261. OLED_WriteCommand(0xD5); //设置显示时钟分频比/振荡器频率
  262. OLED_WriteCommand(0x80);
  263. OLED_WriteCommand(0xA8); //设置多路复用率
  264. OLED_WriteCommand(0x3F);
  265. OLED_WriteCommand(0xD3); //设置显示偏移
  266. OLED_WriteCommand(0x00);
  267. OLED_WriteCommand(0x40); //设置显示开始行
  268. OLED_WriteCommand(0xA1); //设置左右方向,0xA1正常 0xA0左右反置
  269. OLED_WriteCommand(0xC8); //设置上下方向,0xC8正常 0xC0上下反置
  270. OLED_WriteCommand(0xDA); //设置COM引脚硬件配置
  271. OLED_WriteCommand(0x12);
  272. OLED_WriteCommand(0x81); //设置对比度控制
  273. OLED_WriteCommand(0xCF);
  274. OLED_WriteCommand(0xD9); //设置预充电周期
  275. OLED_WriteCommand(0xF1);
  276. OLED_WriteCommand(0xDB); //设置VCOMH取消选择级别
  277. OLED_WriteCommand(0x30);
  278. OLED_WriteCommand(0xA4); //设置整个显示打开/关闭
  279. OLED_WriteCommand(0xA6); //设置正常/倒转显示
  280. OLED_WriteCommand(0x8D); //设置充电泵
  281. OLED_WriteCommand(0x14);
  282. OLED_WriteCommand(0xAF); //开启显示
  283. OLED_Clear(); //OLED清屏
  284. }

 OLED.h

  1. #ifndef __OLED_H
  2. #define __OLED_H
  3. void OLED_Init(void);
  4. void OLED_Clear(void);
  5. void OLED_ShowChar(uint8_t Line, uint8_t Column, char Char);
  6. void OLED_ShowString(uint8_t Line, uint8_t Column, char *String);
  7. void OLED_ShowNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length);
  8. void OLED_ShowSignedNum(uint8_t Line, uint8_t Column, int32_t Number, uint8_t Length);
  9. void OLED_ShowHexNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length);
  10. void OLED_ShowBinNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length);
  11. #endif

OLED_FONT.H

  1. #ifndef __OLED_FONT_H
  2. #define __OLED_FONT_H
  3. /*OLED字模库,宽8像素,高16像素*/
  4. const uint8_t OLED_F8x16[][16]=
  5. {
  6. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  7. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  8. 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
  9. 0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  10. 0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,
  11. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  12. 0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,
  13. 0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  14. 0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,
  15. 0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  16. 0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,
  17. 0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  18. 0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,
  19. 0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  20. 0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,
  21. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  22. 0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,
  23. 0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  24. 0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,
  25. 0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  26. 0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,
  27. 0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  28. 0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,
  29. 0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  30. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  31. 0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  32. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  33. 0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  34. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  35. 0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  36. 0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,
  37. 0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  38. 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
  39. 0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  40. 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,
  41. 0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  42. 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,
  43. 0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  44. 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,
  45. 0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  46. 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,
  47. 0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  48. 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,
  49. 0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  50. 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,
  51. 0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  52. 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,
  53. 0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  54. 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,
  55. 0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  56. 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
  57. 0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  58. 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,
  59. 0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  60. 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,
  61. 0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  62. 0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,
  63. 0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  64. 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
  65. 0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  66. 0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
  67. 0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  68. 0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,
  69. 0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  70. 0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,
  71. 0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  72. 0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,
  73. 0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  74. 0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,
  75. 0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  76. 0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,
  77. 0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  78. 0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,
  79. 0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  80. 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,
  81. 0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  82. 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,
  83. 0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  84. 0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,
  85. 0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  86. 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,
  87. 0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  88. 0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,
  89. 0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  90. 0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,
  91. 0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  92. 0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,
  93. 0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  94. 0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,
  95. 0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  96. 0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,
  97. 0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  98. 0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,
  99. 0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  100. 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,
  101. 0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  102. 0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,
  103. 0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  104. 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,
  105. 0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  106. 0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,
  107. 0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  108. 0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,
  109. 0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  110. 0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,
  111. 0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  112. 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,
  113. 0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  114. 0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,
  115. 0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  116. 0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,
  117. 0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  118. 0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,
  119. 0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  120. 0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,
  121. 0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  122. 0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,
  123. 0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  124. 0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,
  125. 0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  126. 0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,
  127. 0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  128. 0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
  129. 0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  130. 0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,
  131. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  132. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  133. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  134. 0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,
  135. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  136. 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
  137. 0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  138. 0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,
  139. 0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  140. 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,
  141. 0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  142. 0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,
  143. 0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  144. 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
  145. 0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  146. 0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,
  147. 0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  148. 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
  149. 0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  150. 0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
  151. 0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  152. 0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,
  153. 0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  154. 0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,
  155. 0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  156. 0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,
  157. 0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  158. 0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,
  159. 0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  160. 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
  161. 0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  162. 0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
  163. 0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  164. 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
  165. 0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  166. 0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,
  167. 0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  168. 0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,
  169. 0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  170. 0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,
  171. 0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  172. 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
  173. 0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  174. 0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,
  175. 0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  176. 0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,
  177. 0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  178. 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,
  179. 0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  180. 0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,
  181. 0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  182. 0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,
  183. 0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  184. 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,
  185. 0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  186. 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
  187. 0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  188. 0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,
  189. 0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  190. 0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,
  191. 0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  192. 0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,
  193. 0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  194. 0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,
  195. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
  196. };
  197. #endif

注:本文转载自blog.csdn.net的m0_60322134的文章"https://blog.csdn.net/m0_60322134/article/details/140748709"。版权归原作者所有,此博客不拥有其著作权,亦不承担相应法律责任。如有侵权,请联系我们删除。
复制链接
复制链接
相关推荐
发表评论
登录后才能发表评论和回复 注册

/ 登录

评论记录:

未查询到任何数据!
回复评论:

分类栏目

后端 (14832) 前端 (14280) 移动开发 (3760) 编程语言 (3851) Java (3904) Python (3298) 人工智能 (10119) AIGC (2810) 大数据 (3499) 数据库 (3945) 数据结构与算法 (3757) 音视频 (2669) 云原生 (3145) 云平台 (2965) 前沿技术 (2993) 开源 (2160) 小程序 (2860) 运维 (2533) 服务器 (2698) 操作系统 (2325) 硬件开发 (2492) 嵌入式 (2955) 微软技术 (2769) 软件工程 (2056) 测试 (2865) 网络空间安全 (2948) 网络与通信 (2797) 用户体验设计 (2592) 学习和成长 (2593) 搜索 (2744) 开发工具 (7108) 游戏 (2829) HarmonyOS (2935) 区块链 (2782) 数学 (3112) 3C硬件 (2759) 资讯 (2909) Android (4709) iOS (1850) 代码人生 (3043) 阅读 (2841)

热门文章

124
嵌入式
关于我们 隐私政策 免责声明 联系我们
Copyright © 2020-2024 蚁人论坛 (iYenn.com) All Rights Reserved.
Scroll to Top